Pond Clear Plus
Rapid Clarification for Turbid Standing Water
Applied Polymer Systems products harness the power of environmentally friendly materials to solve numerous water quality, erosion, and sediment challenges. Anionic polyacrylamide (PAM) is a polymer flocculant that can be used for a wide variety of erosion, sediment, and stormwater management applications. APS products bind, stabilize, and/or remove commonly problematic particles like sediment (clays, silt), metals, and nutrients to prevent erosion, clear water, and improve BMP performance. APS products are made and packaged in the United States, are drinking water quality (NSF/ANSI Standard 60 Certified), have been extensively toxicity tested by third party laboratories in accordance with EPA standards, and are safe for both terrestrial and aquatic organisms and environments.
Product Overview
Pond Clear Plus combines polyacrylamide (PAM) with natural minerals to act as a rapid-set flocculant for turbid ponds and detention basins. It is designed for fast deployment and visible results within 24 hours—binding sediment and reducing total suspended solids with minimal agitation. Like all APS products, it is made in the U.S., certified for drinking water applications, and extensively tested to EPA environmental safety standards.
Fast-Acting Treatment for Stormwater and Detention Ponds
Natural Earth Minerals Activated by Anionic Polymer Technology
Safe for Aquatic Life and Environmentally Friendly
Primary Applications
- Removes suspended sediment in ponds and lakes
- Perfect for turbid sediment traps or basins
- Decreases turbidity and TSS
- Meeting water quality discharge limits
Features and Benefits
- Works on most water and suspended sediment
- Binds and settles colloidal clays and particles
- Applied directly to pond surface
- Minimal mixing required for treatment
- Settles and removes turbidity within 24 hours
- Does not affect pH
- Made from natural earth minerals & Silt Stop anionic polyacrylamides
- Environmentally friendly and safe for fish and sensitive aquatic organisms
Directions for Use
- Pond Clear Plus may be applied via hydroseed or dry/hand spreading.
- Apply evenly over the surface of entire pond. Wait 24 hours for turbidity to settle to bottom.
- Dewater clear, treated water from pond surface or enjoy clear pond water.
- For hydroseeding, Pond Clear Plus should be added to water in truck and mixed for at least 5 minutes prior to application. Do not add water to Pond Clear Plus.
- Agitation and mixing of pond surface during or after application will provide best results.
Application Rates
- 100-200 pounds Pond Clear Plus per acre foot (~325,000 gallons)
Precautions / Limitations
- Use only as directed – exceeding suggested application rates will not improve performance.
- Will work on most waters, pre-liminary testing is suggested to ensure effective treatment.
- Mixing is suggested for optimal performance.
- Avoid inhaling dust/ powder, may cause irritation. Use dust mask, gloves, and eye protection.
- Clean up spills quickly. Do not use water unless necessary, slippery conditions will result.
Downloads
Other Products You Should Know About
Frequently Asked Questions
Here are some quick answers to common questions about APS polymers, flocculants, and stormwater testing. For more details, visit our full FAQ page.
General Company and Approach
- What does Applied Polymer Systems (APS) do?
APS develops and supports polymer-based solutions for erosion and sediment control during construction. - What makes APS different from other erosion control suppliers?
APS focuses on testing, technical support, and correct polymer selection rather than one-size-fits-all products.
🔗 APS technical support approach | Polymer performance testing - Who typically works with APS?
APS works with engineers, contractors, inspectors, and regulators involved in construction-phase stormwater compliance.
🔗 Industries served
Flocculants & Polymers
- What are flocculants?
Flocculants help fine sediment particles bind together so they can settle and be captured within BMPs (Best Management Practices). - Why are flocculants used in construction stormwater management?
They address fine silts and clays that traditional sediment controls struggle to capture. - Do flocculants replace erosion and sediment controls?
No. Flocculants enhance the performance of BMPs, not replace them. They work best in combination with properly designed and maintained basins, ditches, and inlet protection. - What is APAM?
APAM stands for Anionic Polyacrylamide, a polymer flocculant commonly used in construction stormwater applications. - Is all APAM the same?
No. Molecular weight and charge density vary, affecting how the polymer interacts with different soils.
🔗 Polymer selection and matching
Why Anionic PAM Is Important
- Why does the charge of a flocculant matter?
Polymer charge affects how it interacts with sediments and aquatic life. - Why is anionic PAM preferred for stormwater applications?
Anionic PAM carries a negative charge that does not readily bind to fish gills or aquatic organisms when used correctly. - Why are cationic polymers not used in construction stormwater?
Cationic polymers carry a positive charge and can bind strongly to fish gills, making them unsafe for stormwater applications.
🔗 Proper polymer selection guidance - How does APAM reduce risk to aquatic life?
When properly tested and applied, APAM binds fine sediment particles together so they settle and can be captured within BMPs, reducing turbidity and minimizing interaction with aquatic organisms downstream.